Synthetic Two Cycle Motor Oils
INTERCEPTOR™ (AIT)
High-performance 2-cycle oil with an emphasis on exhaust power valves. Contains high levels of detergent additives to prevent valve sticking. Replaces manufacturer-branded oils. Injector use or 50:1 premix. Excellent in snowmobiles, motorcycles, PWC, ATVs and jet boats.

DOMINATOR™ (TDR)
Racing 2-cycle oil with an emphasis toward high-horsepower and modified racing or trail motors. Contains higher viscosity base oils for best overall protection and additives for higher operating temperatures. Injector use or 50:1 pre-mix. For snowmobiles, motorcycles, ATVs, PWC, go-carts and racing outboard motors.

HP Injector™ (HPI)
Excellent for all outboard motors with a performance emphasis on modern direct-fuel-injected (DFI) technology. Also recommended for personal watercraft, jet boats, motorcycles, snowmobiles and ATVs. Injector use or 50:1 premix. A secondary recommendation but very good for non-power valbee ATV engines. Injector use or 50:1 pre-mix.

Saber™ 100:1 (ATP)
Designed for pre-mix applications as lean as 100:1 ratios or richer. Improves throttle response and lowers or eliminates smoke. Minimizes deposit formation and lowers emissions. Performance emphasis on hand-held power equipment such as chainsaws and lawn/utility equipment.

Saber™ Outboard (ATO)
Designed for pre-mix applications as lean as 100:1 ratios or richer. Improves throttle response and lowers or eliminates smoke. Minimizes deposit formation and lowers emissions. Performance emphasis on the cooler operations of water-cooled motors.

Synthetic Four Cycle Motor Oils
Formula 4-Stroke® PowerSports 0W-40 (AFF)
Specially formulated for four-stroke recreational ATV motors. Reduces wear. Wet clutch compatible. Contains no friction modifiers. Broad viscosity range makes it excellent for use in both hot and cold weather conditions.

SAE 10W-30 Formula 4-Stroke® Marine Synthetic Motor Oil (WCT)
For use in 4-stroke gasoline fueled engines in marine applications. Offers unsurpassed wear protection, viscosity stability, low volatility and excellent rust protection. NMMA FC-W approved and "warranty certified". For use in 4-stroke outboard and marine nboard engines. Also excellent for personal watercraft.

SAE 10W-40 Formula 4-Stroke® Marine Synthetic Motor Oil (WCF)
For use in 4-stroke gasoline fueled engines in marine applications. Offers unsurpassed wear protection, viscosity stability, low volatility and excellent rust protection. NMMA FC-W approved and "warranty certified". For use in 4-stroke outboard and marine nboard engines. Also excellent for personal watercraft.

Formula 4-Stroke® 10W-30/SAE 30 Small Engine Oil (ASE)
Designed originally for the adverse operating conditions of air-cooled commercial engines making, this is one tough oil. Excellent shear stability, exceptional wear protection, oxidation resistant, and wet-clutch compatibility makes this oil an ideal choice for ATVs requiring an SAE 10W-30.

Formula 4-Stroke® 10W-40 Synthetic Scooter Oil (ASO)
Meets the needs of today's high-tech air- and water-cooled four-stroke motorized scooters. Unsurpassed wear protection and friction reduction for longer equipment life. Protects transmissions and gear boxes. Wet-clutch compatible to insure smooth clutch operation. Provides long-term protection during storage.